How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Car Electronics Technician
Category: Car Electronics
Satisfied Customers: 20593
Experience:  over 30 years, ARA, Sony, Alpine, Audiovox, Kenwood, Muntz. Sales, Repair & Installation
1609972
Type Your Car Electronics Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

What is error code 10 on a Pioneer deck?

Resolved Question:

What is error code 10 on a Pioneer deck?

Submitted: 7 years ago.
Category: Car Electronics
Expert:  Don 'Mo Lurch' replied 7 years ago.

This will depend on the Pioneer Model Number.

If you have that info, please post it.

Don 'Mo Lurch' and other Car Electronics Specialists are ready to help you
Customer: replied 7 years ago.

What happened is that my brother put a CD in without the faceplate on so I had to pull the CD out and now if you put a CD in it stays in and doesn't play and shows error 10. Please help.

Expert:  Don 'Mo Lurch' replied 7 years ago.

Thank you for the added info.................

Please supply the Model number of the Pioneer unit.

Should be on the front.

Customer: replied 7 years ago.

It's a Pioneer super tuner deh-p600. When I put the CD in, it does not come out or play and shows error 10.

Thanks for helping dude!!

Expert:  Don 'Mo Lurch' replied 7 years ago.

Thank you for the added info.............

Pioneers explanation:

Error 10 = Electrical or Mechanical Error
Turn the ignition
Switch OFF and back ON,

or switch to a different source,

then back to the CD player.

Typically this will cure the problem, but if not you can try a reset

Remove Unit & Unplug for approximately 5 minutes
Reconnect & press Eject

Otherwise the CD is jammed & removal & repair will be needed.

If this is a CDR, CDRW, MP3 CD, the label or thickness could be causing the jam.

Customer: replied 7 years ago.

I did all that. I pulled the whole deck out of the car and reinstalled it and pushed the eject button. You could hear noise like it is ejecting but nothing. Do you think I need another deck?

Expert:  Don 'Mo Lurch' replied 7 years ago.

If the above did not do the trick, then the CD mechanism is jammed & yes another unit would probably be cheaper. As Wal-Mart sells pioneer for less than $110.00, which repair would be at least that.

Customer: replied 7 years ago.

Thank you so much for your help.

Expert:  Don 'Mo Lurch' replied 7 years ago.

If you need further assistance let me know.

Thank you

Related Car Electronics Questions