Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.

Get a Professional Answer

Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.

100% Satisfaction Guarantee

Rate the answer you receive.

Ask Ryan Your Own Question

Ryan, Engineer

Category: Calculus and Above

Satisfied Customers: 8951

Experience: B.S. in Civil Engineering

40260889

Type Your Calculus and Above Question Here...

Ryan is online now

4. The torque, T Nm, required to rotate shafts of different

This answer was rated:

★★★★★

4. The torque, T Nm, required to rotate shafts of different diameters, D mm, on a machine has been tested and recorded below: D(mm) 6 10 14 18 21 25 T(Nm) 5.5 7.0 9.5 12.5 13.5 16.5 A)Use the method of least squares to determine the linear regression equation that relates the torque to the diameter. B)Estimate the value of torque required when the diameter is 16 mm & the coefficient of correlation between these variables.