How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask FIXITMAN Your Own Question
FIXITMAN
FIXITMAN, Master Technician
Category: Cadillac
Satisfied Customers: 17143
Experience:  ASE MASTER CERTIFIED, AA DEGREE AUTO/DIESEL TECH.
1627031
Type Your Cadillac Question Here...
FIXITMAN is online now
A new question is answered every 9 seconds

I have a 2005 sxt awd, code po710, replaced the swps, ebcm,

Customer Question

I have a 2005 sxt awd, code po710, replaced the swps, ebcm, stability control module, checked the 3 pwm wires from ebcm to stability mod, snap on solus shows steering angle data to ebcm but also says steering angle not zero'd. how does one re calibrate the swps would a reflash of the ebcm doe this
Submitted: 11 months ago.
Category: Cadillac
Expert:  FIXITMAN replied 11 months ago.

Hello, my name is***** would need to recalibrate the steering angle with the new module. Once the new module is programmed to the vehicle you have to use the options on your scan tool to recalibrate the sensor. Not all scan tools have this capability. Once calibrated you should be fine. Let me know if you need more help.

Customer: replied 11 months ago.
I have an appointment on Monday to reflash the ebcm, id like to wait till then to rate as I may have more questions
Expert:  FIXITMAN replied 11 months ago.

Not a problem. We can also continue after rating. Have a great weekend.