How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Crawford Your Own Question
Wayne Crawford
Wayne Crawford, Shop Owner
Category: Cadillac
Satisfied Customers: 3904
Experience:  General Repair Shop Owner
66997337
Type Your Cadillac Question Here...
Wayne Crawford is online now
A new question is answered every 9 seconds

Cadillac Escalade: I have a 2004 cadilac escalade and need

Customer Question

I have a 2004 cadilac escalade and need to replace a rear axle seal. tore it all apart like I have done on GM rears before. removed C clips and the axles would not slide out. It is an AWD 6.0. looks like sensors in the rear housing on the ends. Are they keeping the axles from sliding out?I did not force or pry anything. just stopped and put back together until I got more info. Any help would be appreciated.
Fred
Submitted: 1 year ago.
Category: Cadillac
Expert:  Wayne Crawford replied 1 year ago.
Hello. My name is ***** ***** I will be helping you today.Just a moment while I get you instructions.
Expert:  Wayne Crawford replied 1 year ago.
OK. I just wanted to verify that. You are doing it right with one exception. You need to use a slide hammer or something. It does just pull out but its a tight fit.
Expert:  Wayne Crawford replied 1 year ago.
I am attaching the instructions here.. most of which you have already done.