Cadillac Escalade '07: Park Assist MalfunctionCode: B0958 and B0961
Country: United StatesMake: CadillacModel: EscaladeYear: 2007
Erase DTC, came back.....
HelloCustomer if there is a plug or ball in the rear trailer hitch then this can cause the problem. These codes are for shorts in the rear left and right sensors. If nothing has been hit or modified on this vehicle then the problem is more than likely in the rear parking module. Start by locating it and checking the connections for looseness or corrosion.
Ok, I think i have to take off the passenger seat.... It's the object alarm module,correct ?I forgot something..... The first thing we found was burned/melted rear sensor cables caused by the muffler. We repaired the cables, but the same problem. Than I connected the scanner an found the two codes...
Well.... I'll send the car to the dealership.....
If there were melted wires then this oul cause the problem. You need to use a scanner and clear out the codes to see if they come back. If they do then the module you mentioned will need to be replaced.
Relist: Answer came too late.
Do you need anymore help?
ASE MASTER CERTIFIED, AA DEGREE AUTO/DIESEL TECH.
No, I've told you, SUV is at the dealership...
Ok. If you have Ny further questions about what they tell yu please lete know.