How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gm Tech (Cam) Your Own Question
Gm Tech (Cam)
Gm Tech (Cam), Cadillac Mechanic
Category: Cadillac
Satisfied Customers: 29428
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Cadillac Question Here...
Gm Tech (Cam) is online now
A new question is answered every 9 seconds

1999 cadillac deville: water pump..pulley..the cam shaft..northstar

This answer was rated:

How do I remove the water pump drive pulley from the end of the cam shaft on a 1999 cadillac deville northstar engine?
Chat Conversation Started
Gm Tech (Cam) :

Hi, I'm Cam I will answer your question quickly but we may need to discuss this further. Please reply to continue the discussion.

Gm Tech (Cam) :

The tool to pull the pulley off is the same one used to pull the power steering pulley off.


Is itjust a force fit onto the cam shaft?

Gm Tech (Cam) :

Yes just a press fit.


doesen't seem to want to budge and I really don't want to destroy the pulley.

Gm Tech (Cam) :

That is why it needs the special puller.

Gm Tech (Cam) and 3 other Cadillac Specialists are ready to help you
Rather than neave neutral feedback you should reply. I would have suggested renting one from a part store.

Related Cadillac Questions