How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Scott Your Own Question
Scott
Scott, Cadillac Technician
Category: Cadillac
Satisfied Customers: 434
Experience:  GM Master technician 15yrs on Cadillac, 25 total, ASE Master Tech automotive
24665677
Type Your Cadillac Question Here...
Scott is online now
A new question is answered every 9 seconds

2002 dts: deville..replace abs module (ebcm)..replaceing

Customer Question

2002 dts deville . replace abs module (ebcm) for code c1214 . after replaceing abs module no more code c1214 . but now i get code c1246 (low brake pads ) car dose not have brake sensor .
Submitted: 7 years ago.
Category: Cadillac
Expert:  Scott replied 7 years ago.
Did you get your module from a dealer, or parts house? You either have the wrong module or a bad one. These modules are vehicle rpo specific, meaning they are preprogrammed for a specific vehicle, with specific options. If you got the module fromn a dealer, have them verify the part number against the vin number of your vehicle to make sure they gave you the right one.
Scott and other Cadillac Specialists are ready to help you
Customer: replied 7 years ago.
thanks scote .i did get from a parts house and that what i have been telling them to . i just needed someone to check with this problem again thanks . ozzie (ozzie trans shop & gm repair)
Expert:  Scott replied 7 years ago.
Your welcome. I have had alot of trouble with rebuilt modules. My experience has been that if you replace a module and gain a whole new problem---module is junk.

Related Cadillac Questions