How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gm Tech (Cam) Your Own Question
Gm Tech (Cam)
Gm Tech (Cam), Cadillac Mechanic
Category: Cadillac
Satisfied Customers: 29396
Experience:  GM Grand Master Technician 2007. 14 years experience.
Type Your Cadillac Question Here...
Gm Tech (Cam) is online now
A new question is answered every 9 seconds

2002 Cadillac Escalade: I replace the front wheel hub assembly..AWD

Resolved Question:

How do I replace the front wheel hub assembly in my 2002 Cadillac Escalade AWD 6.0 Liter?
Submitted: 7 years ago.
Category: Cadillac
Expert:  Gm Tech (Cam) replied 7 years ago.

Welcome. To change the hubs, do the following.

  • Lift and SAFELY support the front of the vehicle.
  • Remove tire
  • Remove caliper bracket to steering knuckle bolts- larger and closer to the axle.
  • Use a wire or strap to support the caliper out of the way.
  • Remove the rotor
  • Remove the dust cap-( useless on these, but they put them there anyway)
  • Remove the axle nut- 36mm
  • Use a hammer and block of wood to make sure the axle is loose.
  • Remove the ABS wiring from the body
  • Remove the 3 15mm bolts from the back side of the knuckle.
  • Use the block of wood and hammer on the back of the hub flange to loosen the hub.
  • Remove hub
  • Clean the surface of rust,
  • Install new hub.
Gm Tech (Cam) and other Cadillac Specialists are ready to help you

Related Cadillac Questions