How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Buick Mechanic
Category: Buick
Satisfied Customers: 20667
Experience:  GM, Chevrolet Cert., Heavy Line Mech, Race Shop Owner, Mobile Electronics.
1609972
Type Your Buick Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

I have a 1993 Buick Skylark with a 2.3 Ltr. DOHC 4-cyl.

Customer Question

I have a 1993 Buick Skylark with a 2.3 Ltr. DOHC 4-cyl. engine. After changing the radiator fluid and refilling the reservoir and the radiator I notice a "low colant sign" on my dash board. Is there a "reset" button somewhere to turn it off? I put in about 7 Ltrs. of coolant, it does not overheat or go into "high" but still shows the "low coolant" sign.
Thanks for an answer!
Submitted: 6 months ago.
Category: Buick
Customer: replied 6 months ago.
On my daughter's Saturn SL2 I always need to press a "reset" button after changing her oil. For that reason and since there is no sign of the engine overheating I assume there must be a similar "reset" button after having drained the radiator fuid for a flushing of the radiator.
Expert:  Don 'Mo Lurch' replied 6 months ago.

.
sorry for the delay............
.
Greetings...... “Hi, I’m Don (akaCustomer and I look forward to helping you!”
.
This is typically caused from bad / dirty connection, Sensor or the Cluster
There is NO "RESET" other than making sure Radiator & Tank is full, then disconnect both Battery Cables & "briefly" touch them together.
I can post Factory Testing, but need to know if you have "Base Cluster" or Gauge Cluster

.
IF you need more information, please ask "prior" to Rating.
.
The way it works:
Once an answer is given, "you" as the customer, are expected to "RATE" the answer as you agreed to do.
.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.
.

Expert:  Don 'Mo Lurch' replied 6 months ago.

Hi, I answered your question correctly & as soon as I saw it.
did you need more info?
please respond or rate my answer, as that is what was agreed to.
thank you
.

Expert:  Don 'Mo Lurch' replied 6 months ago.

.
Please do the right thing and leave a rating, using the rating system, so I may be credited for this Q&A.
.
NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.
The question will still remain open for follow up questions if needed.
.
If for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT today.
Please reply and let me know why, so I can help more/better.
.
Rating is very Important to our Service
.
.