How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask GM Tech (Cam) Your Own Question
GM Tech (Cam)
GM Tech (Cam), Buick Technician
Category: Buick
Satisfied Customers: 29396
Experience:  GM Grand Master Technician 2007. 11 years experience.
Type Your Buick Question Here...
GM Tech (Cam) is online now
A new question is answered every 9 seconds

How do I replace the wiper motor on a 1996 Lesabre

Resolved Question:

How do I replace the wiper motor on a 1996 Lesabre
Submitted: 6 years ago.
Category: Buick
Expert:  GM Tech (Cam) replied 6 years ago.
Welcome. Object Number: 415963  Size: SH

  • Open the hood with the wiper arms in the parked position.
  • Lift the wiper blade from the windshield and disengage the retaining latch with a screwdriver.

  • Object Number: 415964  Size: SH

  • Remove the wiper arm from the wiper transmission drive shaft.
    1. Raise the hood.
    2. Remove the wiper arm assemblies.

    3. Object Number: 306349  Size: SH

    4. Remove the rear hood seal.
    5. Remove the push in/screw retainers.
    6. Remove the right hand wiper transmission bolts under the panel.
    7. Lower the right hand wiper transmission drive shaft.
    8. Disconnect the washer hoses.
    9. Remove the air inlet grille panel (1).

    10. Object Number: 306506  Size: SH

    11. Disconnect the washer hose.
    12. Remove the transmission drive link socket from the wiper motor crank arm using the J 39232 Wiper Transmission Separator.

    13. Object Number: 415971  Size: SH

    14. Disconnect the electrical connectors from the wiper motor.

    15. Object Number: 415975  Size: SH

    16. Remove three screws.
    17. Remove the wiper motor and the seal while guiding the crank arm through the hole.
    GM Tech (Cam) and 2 other Buick Specialists are ready to help you

    Related Buick Questions