How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask rpmdiag Your Own Question
rpmdiag, Tech and Instructor
Category: Buick
Satisfied Customers: 6702
Experience:  Since 1975
Type Your Buick Question Here...
rpmdiag is online now
A new question is answered every 9 seconds

i want to hotwire my 1990 buick century. My ignition will

Resolved Question:

i want to hotwire my 1990 buick century. My ignition will unlock steering wheel and turn dash on but will no longer go far enough to turn starter. I have a pushbutton
Submitted: 7 years ago.
Category: Buick
Expert:  rpmdiag replied 7 years ago.



One wire goes to battery power, the other goes to the starter solenoid ignition terminal. With key in on position, car should start with button.


Thanks in advance for your ACCEPT and POSITIVE feedback,



Customer: replied 7 years ago.
i will pay you I should have been more specific. Im looking for that wire (color) going up my steering column . I didnt want to tear my column up to look at the ignition and i didnt want to cut into every wire
Expert:  rpmdiag replied 7 years ago.

You won't be going through the ignition switch harness for this, just run the wires separately through the firewall and to the appropriate places. It's a 20 minute job my way, and you won't see the wires.


Thanks in adavnce for your ACCEPT,



rpmdiag and 7 other Buick Specialists are ready to help you

Related Buick Questions