How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
14379177
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

WHEN INSTALLING a separate SOG paddle wheel, is the axis of

Customer Question

wHEN INSTALLING a separate SOG paddle wheel, is the axis of the wheel supposed to parallel to the transom or os it more important to have the bottom of the trandsducer housing for the sensor ti be parallel with the bottom of the hull? The boat design has a slight rise from the centerline to the chine.
Submitted: 2 months ago.
Category: Boat
Expert:  Jason replied 2 months ago.

Hi Dave, good morning my name is Jason

I don't quite understand the way you are wording this. Can you take a picture of your paddle wheel and how it is install. I can tell you if it's correct or not.

Expert:  Jason replied 2 months ago.

Hi Dave. Any luck with that picture?

Related Boat Questions