How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3386
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
67216606
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

Will an Atwood Hydro-stabilizer model 9400/9401 work on a

Customer Question

Hello. Will an Atwood Hydro-stabilizer model 9400/9401 work on a Volvo/Penta SX series outdrive? (5.0)
The Atwood directions say it will not fit Volvo/Penta 280 or 290, but will fit a 270?
Submitted: 6 months ago.
Category: Boat
Expert:  Charles replied 6 months ago.

Hello, my name is***** will assist you.

Expert:  Charles replied 6 months ago.

This is mainly due to the thickness of the cavitation plates on the drives. It will fit onto the SX drive just fine. You may need to drill the holes from the bottom side to get enough access.

Related Boat Questions