How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3341
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
67216606
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

I have a minnkota power drive pd/ap 65 and after setting all

Customer Question

I have a minnkota power drive pd/ap 65 and after setting all wintrer when I plug it into power source it starts spinning to the right and the prop will not spin.
Submitted: 3 months ago.
Category: Boat
Expert:  Charles replied 3 months ago.

Hello, my name is***** will assist you.

Expert:  Charles replied 3 months ago.

The first step to troubleshooting this is to eliminate the AP from the circuit. Unplug the power cord. Open the head of the motor and then disconnect the AP circuit boat from the system. then plug in the cord and deploy the unit. We are looking to see if the problem is still there or of it is not not spinning. If it is not, the AP was the fault and it needs to be replaced.

Related Boat Questions