How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
14379177
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

I have an "AL" showing on my smart craft guage, continuous

Customer Question

I have an "AL" showing on my smart craft guage, continuous beep when I turn the key to on.
motor trim not working.
engine not starting.
i just installed the batteries - showing 11.7 and 11.5 on my tester
boat has been sitting 2 years.
where do I start ?
Submitted: 6 months ago.
Category: Boat
Expert:  Charles replied 6 months ago.

Hello, my name is***** will assist you.

Expert:  Charles replied 6 months ago.

Which SmartCraft gauge do you have?

Customer: replied 6 months ago.
I have no idea, it was on the boat when I bought it in 2008, I didn't get a lot of paper work
Expert:  Charles replied 6 months ago.

Is it a separate tach and speed, a large rectangle, or a smaller square?

Customer: replied 6 months ago.
No it's a round mercury smart craft about 3 1/2" diamond - are you familiar with those ?
Basically they give all the read outs of the motor and boat
Expert:  Charles replied 6 months ago.

It is important for me to know which gauge, so I can guide you to get more information from it as to the cause of the alarm.

Related Boat Questions