How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3309
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

Stuck in one position, dot`t type fast ill get friend, no

Customer Question

stuck in one position
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Marine Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so the Marine Mechanic can help you best.
Customer: dot`t type fast ill get friend
JA: Is there anything else the Marine Mechanic should be aware of?
Customer: no
Submitted: 2 months ago.
Category: Boat
Expert:  Jason replied 2 months ago.

Hello my name is ***** ***** am I speaking with?

I don't understand your question. What are you working on, and what kind of problem are you having?

Customer: replied 2 months ago.
the trim is stuck in one position runs fine but wont plain out
Customer: replied 2 months ago.
it runs fine only at an idle
Expert:  Jason replied 2 months ago.

What are you working on?

Expert:  Jason replied 2 months ago.

I'm not going to call you unless I know what you are working on.

Customer: replied 2 months ago.
Let's start over I'm working on a 1995 Kawasaki Jetski Supersport XI
The trim is stuck in the down position it runs fine at an idle but when you give it gas it won't plain out
Is this the motor for the trim or something else
Expert:  Jason replied 2 months ago.

I don't work on these, I will opt out.

Customer: replied 2 months ago.
really after all that you just back out on the problem ??? well this was a HUGE waste of TIME AND MONEY
Expert:  Charles replied 2 months ago.

Hello, my name is***** will assist you.

Test the power going to the trim motor when you press the switch. If there is no power there, inspect the fuses, if they are good, replace the switch. If you do get power to the motor and it still does not run, replace the trim motor. This will allow the ski to plane out when you hit the throttle.

Related Boat Questions