How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3342
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
67216606
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

Mounting four 350s on a caterman, what is the center line of

Customer Question

Mounting four 350s on a caterman, what is the center line of two motors should be. How close can u pair them with out problems. Like Freeman boat works are doing?
Submitted: 4 months ago.
Category: Boat
Expert:  Charles replied 4 months ago.

Hello, my name is***** will assist you.

The book spec for the 350 is 28.5 inches between the canter of the engines. I typically use the center of the propshaft, since it is dead center of the engine.

Related Boat Questions