How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3313
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

My motor continues to trim but the trim and rpm gauges have

Customer Question

My motor continues to trim but the trim and rpm gauges have stopped Where do I check for problem. I have checked some fuses they were good.There may be one I have not found.
Submitted: 3 months ago.
Category: Boat
Expert:  Charles replied 3 months ago.

Hello, my name is***** will assist you.

The trim sender if located on the port side of the engine. It has a plastic arm on it that you should see when the engine is trimmed all the way up. Typically the arm breaks. the sender is part 84-88 in the diagram.

Related Boat Questions