Have Boat Questions? Ask a Boat Repair Expert.
Hello Greg. My name is Tan.
If the engine idles it isn't flooding. Did you remove the high jets in the bottom of the float bowl and clean?
Have you done a spark and compression test?
Small slotted screw driver. Here is what the jet tool looks like. The dimensions are posted also if you want to make one. http://forums.iboats.com/filedata/fetch?id=7114953
Here's the tool from BRP. http://www.marineengine.com/parts/images/hg/omc/0317002.jpg
No gasket with plastic bowl.The float is adjusted parallel to the bowl inlet needle closed.
Lettered side out.
The jets are fixed size.