How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tan Your Own Question
Tan
Tan, MerCruiser Certified Technician
Category: Boat
Satisfied Customers: 10752
Experience:  40 yrs. experience with complete engine repairs both inboard/outboard and MerCruiser Certified Technician.
25721800
Type Your Boat Question Here...
Tan is online now
A new question is answered every 9 seconds

Are you still answering marine questions, and if so do you

Customer Question

Are you still answering marine questions, and if so do you want to help with a 115 mercury 4 stroke, 2003?
Submitted: 11 months ago.
Category: Boat
Expert:  Tan replied 11 months ago.

Hello Bruce. Yes still here. Have you checked all the fuses 4 & 5 on the engine? There is four 20 amp and four 30 amp fuses.

http://www.marineengine.com/parts/mercury_marine_parts/static/img/COMMON/2093.gif

Customer: replied 11 months ago.
I found 3 20amp fuses on the stbd side, but no 30s, are they near each other?
Expert:  Tan replied 11 months ago.

They should be in the same area. Did you pull the front cover off? The fuse will be coming off the start solenoid red wire. Main fuse.

Customer: replied 11 months ago.
Are we on the same engine? There is no front cover, the vst/fuel pump assembly is right in the front.
Expert:  Tan replied 11 months ago.

Could I get the engine serial number please?

Customer: replied 11 months ago.
2b072730. I'll be in front of the engine in 5 minutes.
Expert:  Tan replied 11 months ago.

I'll have to opt out Bruce don't have manual on that particular motor.

Customer: replied 11 months ago.
Ok, thanks.
Customer: replied 11 months ago.
Hey, I never did get a response from anyone else, is that normal or do I need to start the process over? Thanks.

Related Boat Questions