How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

No power to the trim andstart fuse : 06 yamaha 75hp 4stroke

Customer Question

no power to the trim andstart fuse
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Marine Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so the Marine Mechanic can help you best.
Customer: 06 yamaha 75hp 4stroke , no power to the trim and starter fuse
JA: Is there anything else important you think the Marine Mechanic should know?
Customer: jump power to the fuse and trim works
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Marine Mechanic about your situation and then connect you two.
Submitted: 4 months ago.
Category: Boat
Expert:  Charles replied 4 months ago.

Hello, my name is***** will assist you.

Would you please post the full model number of the engine?

Customer: replied 4 months ago.
yamaha 75hp 4stroke ltr
Customer: replied 4 months ago.
ran fine last week went to start it nothing no trim control no voltage at the trim ind ignitron fuse
Expert:  Charles replied 4 months ago.

First, make sure that the battery connections are tight and in the correct places.

Was anything done to the boat this last week?

Customer: replied 4 months ago.
battery connections are good and nothing was done to the boat
Expert:  Charles replied 4 months ago.

Do you have a multimeter?

Customer: replied 4 months ago.
thats how I know there is no power to that fuse if I jump power to the fuse motor will turn over and trim works
Expert:  Charles replied 4 months ago.

Ok, with engine not running, test the voltage right at the battery. Then again on the starter solenoid. If it is above 12V, Have a helper turn the key to start and bold it there, while you are checking the readings on the engine.

does the voltage change?

Related Boat Questions