How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
14379177
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

MOTOR DIES AT LOW RPM AND A LOAD ON. WHILE TRYING TO BACK IN

Customer Question

MOTOR DIES AT LOW RPM AND A LOAD ON. WHILE TRYING TO BACK IN ARE SLIP.
IT COUCH AND DIE AT 500 RPMS.
GET OVER 2000 RPMS SHE RUNS GREAT. TRYING TO POWER UP IN GEAR THE VOLTAGE GAGE DROPS SOME TIMES TO 10 VOLTS RPM DROPS AND THE MOTOR DIES,
I TRY PUMPING THE BALL IT THE SAME TIME BUT NO GOOD. SHE WILL DIE. IF YOU HAVE a gestation im all ears THE DOCK WISER TELL ME ONE HUNDRED DIFFERENT THINGS TOOK WATER SEPARATOR OUT NO WATER BUT SOME VERY SMALL BLACK DOTS SMALLER THE N A PIN HEAD FILLER CAP W AS OFF IN TEST. GOING TO CHECK CYCLINDER PRESSURE TEST TOMORROW
Submitted: 6 months ago.
Category: Boat
Expert:  Tan replied 6 months ago.

Hello. My name is Tan.

Could I get the engine model number please?

Related Boat Questions