How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

Have a 2001 Sunsation twin engine mercruiser 7.4l. Had to change

Customer Question

have a 2001 Sunsation twin engine mercruiser 7.4l. Had to change trim and tilt sensors on outdrive. Was able to locate both sensor hook ups on starboard engine. On port engine could locate the trim guage wire hook up but could not find the hook up for the tilt limit sensor wire. Where in the wire harness is the port engine tilt limit sensor hook up.
Submitted: 1 year ago.
Category: Boat
Expert:  Jason replied 1 year ago.
Hi Don, my name is ***** ***** engines the connection for the tilt limit is over by the trim pump. Was it near the trim pump on your starboard engine? Do you have the new wire from the trim limit switch pulled into the boat already?

Related Boat Questions