How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
14379177
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

Need to take out the prop shaft alpha 1 Gen 2

Customer Question

Need to take out the prop shaft alpha 1 Gen 2
Submitted: 7 months ago.
Category: Boat
Expert:  Jason replied 7 months ago.
Hello my name is ***** ***** am I speaking with? Did you have a specific question about shaft removal, or did you need the instructions from the service manual for removal?
Customer: replied 7 months ago.
You help me before i replace the bearing bushing and u joint still vibrates. Next step prop shaft have removed the spanner nut and ring tab. What the next step and how it done.
Customer: replied 7 months ago.
Alpha 1 gen 2
Expert:  Jason replied 7 months ago.
If you spin the propeller do you see the end of the shaft wobble?
Customer: replied 7 months ago.
I'm pass that didn't you read the text prop, spanner nut and tab washer ring is off
Customer: replied 7 months ago.
If you think it may be something else like what

Related Boat Questions