How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tan Your Own Question
Tan
Tan, MerCruiser Certified Technician
Category: Boat
Satisfied Customers: 10620
Experience:  40 yrs. experience with complete engine repairs both inboard/outboard and MerCruiser Certified Technician.
25721800
Type Your Boat Question Here...
Tan is online now
A new question is answered every 9 seconds

Marine outboard motor

Customer Question

marine outboard motor
Submitted: 7 months ago.
Category: Boat
Expert:  Tan replied 7 months ago.
Hello Joe. My name is ***** ***** checked all the connections to the trim? If all the connections are clean and tight then the trim motor is bad and will have to be replaced.A bad corroded connection can cause the fuse to blow. Corrosion creates resistance.
Expert:  Tan replied 7 months ago.
Here is a link to a new motor and reservoir assembly. They come as an assembly. http://www.dbelectrical.com/p-3529-tilt-trim-motor-chryslerforceevinrudejohnson-omc.aspx?CAWELAID=130000240000000526&CAGPSPN=pla&CAAGID=22977563576&CATCI=pla-81495392936&gclid=Cj0KEQjwrte4BRD-oYi3y5_AhZ4BEiQAzIFxn2xajZSKW5SZFsKtYTqu0dXg8kDagabkxwt2N_rXePkaApkT8P8HAQ

Related Boat Questions