How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tan Your Own Question
Tan
Tan, MerCruiser Certified Technician
Category: Boat
Satisfied Customers: 10621
Experience:  40 yrs. experience with complete engine repairs both inboard/outboard and MerCruiser Certified Technician.
25721800
Type Your Boat Question Here...
Tan is online now
A new question is answered every 9 seconds

I would l like to know how to remove starter from 1989four

Customer Question

I would l like to know how to remove starter from 1989four Winn's 4cyclinder gm motor .
Submitted: 10 months ago.
Category: Boat
Expert:  Tan replied 10 months ago.

Hello. My name is Tan.

The starter is bolted to the engine block with 2 bolts # ***** coming up from the bottom of the starter. Then a bracket # ***** at the back of the starter. One bolt is on the outside edge of the starter and the other on the inside across from the outside bolt # *****

http://www.marineengine.com/parts/mercury_marine_parts/static/img/COMMON/11482.gif

This may not look exactly like your starter but they all use the same procedure.

Post back if you need further assistance.

Related Boat Questions