How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dominick Your Own Question
Dominick
Dominick, Marine Mechanic
Category: Boat
Satisfied Customers: 1009
Experience:  25 Years Experience as Mechanic, 20 Yrs Boat Yard Owner/Mechanic, Factory Certified
14379177
Type Your Boat Question Here...
Dominick is online now
A new question is answered every 9 seconds

I have a 2006 SeaRay 280 with several problems, I would like

Customer Question

I have a 2006 SeaRay 280 with several problems, I would like to start with a simple problem and go from there,
My Bilge pump works in Auto but the manual button on the console does not work.
Submitted: 11 months ago.
Category: Boat
Expert:  Jeff G. replied 11 months ago.

Do you have a volt meter or 12 volt test light to see if you have voltage to the switch?

Check at the bilge pump, about a foot and a half from the pump for where the wiring harness connects to the pump wiring. Common for the butt connector to corrode. Make sure it is not corroded and is waterproof.

Related Boat Questions