How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Charles Your Own Question
Charles
Charles, Marine Mechanic
Category: Boat
Satisfied Customers: 3341
Experience:  US Navy (Ret) Certified Mercury Marine Tech with over a decade of repair experience.
67216606
Type Your Boat Question Here...
Charles is online now
A new question is answered every 9 seconds

I am changing from a 300 ProMax to a 300 Optimax.Promax is

Customer Question

I am changing from a 300 ProMax to a 300 Optimax.
Promax is rigged with two 2inch rigging tubes. 300XS
rigging kit comes with one 21/2 inch tube.
What is my best solution? Plug the extra hole? Is there
a Y tube available so I don't have to plug the extra hole.
Thanks Bill XXXX
Submitted: 1 year ago.
Category: Boat
Expert:  Charles replied 1 year ago.
Hello, my name is***** you for allowing me to assist you today.
Bill, cut a piece of wood and insert it onto the back side of the 2" hole. Screw it to the boar using one of the screw holes that are already there. Get a 2 1/2" hole saw. Use the board that you installed as the guide for the pilot bit of the hole saw. Drill into it and then cut the larger hole right where the smaller one is.

Related Boat Questions