How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy R. Your Own Question
Jeremy R.
Jeremy R., MarineTechnician
Category: Boat
Satisfied Customers: 9019
Experience:  Multiple factory certifications 20+ years of experience.
8380480
Type Your Boat Question Here...
Jeremy R. is online now
A new question is answered every 9 seconds

I have a technical question about my 1 year old 130S- Saildrive.

Customer Question

I have a technical question about my 1 year old 130S-B Saildrive. It is pushing oil up through the extraction tube cap. There is no water entering the unit, and the oil is clean and clear. The oil is at the correct level between the first and second marks. When I shut the engine down and remove the extraction tube cap, there is oil up to the cap. As soon as I remove the oil fill cap, the oil drops down into the oil extraction tube to it's normal level. It seems as if the o-rings on the extraction tube cap are not sealing properly, or the case of over pressurizing. Can you provide any suggestions?
Submitted: 1 year ago.
Category: Boat
Expert:  Jeremy R. replied 1 year ago.
Hi, My name is***** you for letting me try and assist you with your problem.
You're on the right track.
The case is getting pressurized.
The fill needs replaced. It should vent through the cap and it's not.

Related Boat Questions