How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve
Steve, BMW Expert
Category: BMW
Satisfied Customers: 23021
Experience:  BMW Expert
26942375
Type Your BMW Question Here...
Steve is online now
A new question is answered every 9 seconds

Rough idle. Misfire on cylinders 1,4 and 10. I've already

Customer Question

Rough idle. Misfire on cylinders 1,4 and 10. I've already replaced all plugs and coils and cleaned carbon on intakes and valves
JA: Is the rough idle intermittent or consistent?
Customer: Consistent
JA: What is the model of your '10 BMW?
Customer: 2006 Bmw 760i
JA: Are you fixing your 760i yourself? What have you tried so far?
Customer: Me and mechanic friend. We swapped around coils, rechecked all plugs to see if they were fouled. Used factory parts. Checked for vacuum leaks and found none and still idling rough. Could it be hi Flo fuel pressure pumps?
JA: Anything else you want the mechanic to know before I connect you?
Customer: Not that I can think of
Submitted: 2 months ago.
Category: BMW
Expert:  Steve replied 2 months ago.
Hello and welcome,
My name is ***** ***** it will be my pleasure to assist you today.
Are any warning lights on?
Customer: replied 2 months ago.
Check engine light, service engine soon message....
Expert:  Steve replied 2 months ago.
what faults exactly are logged in the car's fault memory?
Customer: replied 2 months ago.
P0300, P0310, P0301, P0301, P0304, P0300 ,P0310 mil on, catalyst, evap, sec air, O2 sensor, misfire, 02 htr
Expert:  Steve replied 2 months ago.

I will provide an honest answer. I trust this will be appreciated. Please remember that a low rating PUNISHES me for being honest and that I receive nothing for my time until a positive rating is clicked.
.
Thank you for your attention to the rating requirement.
.

it is unfortunately very difficult to diagnose this sophisticated engine with only a generic p code reader. I would suspect that you have an injector issue or high pressure fuel pump issue, but would strongly advise that proper diagnostics be run using a factory BMW scan tool or equivalent.

.

if you need a good shop for a code scan check out www.bimmershops.com or www.bimrs.org for options

.
Please let me know if you have further questions. Please do not forget to click a positive rating as this is the only way I receive credit for my answer, thank you. Best wishes with your vehicle.

Expert:  Steve replied 2 months ago.

if there are no additional questions please kindly CLICK ON a positive rating

Related BMW Questions