How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Your Own Question
Kevin
Kevin, BMW Mechanic
Category: BMW
Satisfied Customers: 1441
Experience:  Diagnostic technician
84635724
Type Your BMW Question Here...
Kevin is online now
A new question is answered every 9 seconds

I have 2010 mini 1.6 n12 b56.i have code 2845 283d.i have

Customer Question

i have 2010 mini 1.6 n12 b56.i have code 2845 283d.i have changed vonos valve.checked cam timing.gides good.chain looks good
Submitted: 4 months ago.
Category: BMW
Expert:  Kevin replied 4 months ago.

Hi im kevin can we clarify whats been done and what hasnt ?have solonoids been replaced ?was timing checked with setting tools ?

Customer: replied 4 months ago.
NEW VANOS SET TIMING RUNS BAD ON START UP IF YOU CLEAR CODES WHILE RUNING THE CAR GUNS GOOD UNTILL TURNED OFF WHAT STARTED PROBLEM.FROUNT MOUNT BROKE CAUSED TO SKIP TIME NO VALVE DAMAGE
Expert:  Kevin replied 4 months ago.

Ok and was timing set with timing tools?

Expert:  Kevin replied 4 months ago.

I dont offer phone service im happy to continue online ?

Customer: replied 4 months ago.
time was set with timing tool
Expert:  Kevin replied 4 months ago.

Have solonoids been replaced?

Customer: replied 4 months ago.
Ok
Expert:  Kevin replied 4 months ago.

?

Expert:  Kevin replied 4 months ago.

If solonoids havent been replaced swap the inlet and exhaust solonoids and clear codes then see if codes change

Customer: replied 4 months ago.
it was sent with toolsI have also replaced the Valve
Expert:  Kevin replied 4 months ago.

Ok im going to opt out see if another tech has any ideas