How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SuperDave Your Own Question
SuperDave, ASE Certified Technician
Category: BMW
Satisfied Customers: 1491
Experience:  over 16 years experience
Type Your BMW Question Here...
SuperDave is online now
A new question is answered every 9 seconds

Low beam replacement on f01 750I ... now do i change this?

Customer Question

low beam replacement on f01 750I ... now do i change this? do i need to remove the bumper?
Submitted: 6 months ago.
Category: BMW
Expert:  SuperDave replied 6 months ago.
You don't have to remove the bumper. Here is Info:
Customer: replied 6 months ago.
it says 'necessary preliminary work: remove front bumper trim'?How do i access teh lower screws without taking the bumper off?
Expert:  SuperDave replied 6 months ago.
Here is Bumper trim diagram:
Customer: replied 6 months ago.
Replaced it - still flickers as it warms up and then goes out? Ballast ? Igniter? (Is there a difference) Adaptive control?

Related BMW Questions