How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Roger Your Own Question
Roger
Roger, BMW Master Tech
Category: BMW
Satisfied Customers: 3037
Experience:  10 yrs. experience as BMW Master Technician, shop foreman and dealer.
8631066
Type Your BMW Question Here...
Roger is online now
A new question is answered every 9 seconds

Have a drive train malfunction warning pop up but still

Customer Question

have a drive train malfunction warning pop up but still drives fine 2011 bmw 750 li xdrive also the light on dadh for engine is lit up. the engine fan runns fast all the time now. this all happened after driving on the hyway for 3 hours. then stopped for half an hour and when i started the car all the above warning turned on
Submitted: 1 year ago.
Category: BMW
Expert:  eauto replied 1 year ago.

The check engine light comes on when the on-board computer detects a fault in engine driveability or performance, transmission control system or transmission, or the emissions system, and a fault code is set and stored in the computer. Faults that can set the check engine light can range from a vaccuum leak, engine mis-fire, low engine compression, faulty sensor such as O2 sensor or other engine sensor, hydraulic pressure loss in transmission, transmission shift solenoid, open/short in wiring harness, emission evaporative system leak, or one of over a hundred different reasons. The only way to know what set a fault code and turned the check engine light on is to have a diagnostic scanner hooked up to the on-board computer and read it for stored diagnostic fault codes. Many auto parts stores will do this service for free- (like auto zone)check with you local parts stores. If none in your area do, then you will have to take it to a shop and pay to have the computer read for stored fault codes. Without knowing the fault codes numbers, it would be irresponsible to guess as to the cause as there are hundreds of possible causes.

Expert:  eauto replied 1 year ago.

is it running warm or hot?