How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask bimmaster Your Own Question
bimmaster, BMW Technician
Category: BMW
Satisfied Customers: 1882
Experience:  3 years dealer experience, master bmw tech
Type Your BMW Question Here...
bimmaster is online now
A new question is answered every 9 seconds

BMW how do get to the crank sensor on a bmw 316 tise 03 c

This answer was rated:

how do get to the crank sensor on a bmw 316 tise 03 compact
Hi, the crank sensor is located on the left side of the engine block under the intake manifold. You would have to access it from under the car.
This type of job would mostly need to be done by feel, since there is no room to see clearly in the area.
The sensor is held on with only 1 4mm or 5mm allen head screw. So if you reach up into that area from below, with the engine cold. Unplug the sensor, remove screw. and pull sensor out. Make sure the sealing o-ring comes out with the sensor, or reach back in to get the o-ring if it's stuck in the hole.

The sensor is #3 in the image below.
bimmaster and 2 other BMW Specialists are ready to help you

Related BMW Questions