How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Matt Your Own Question
Matt
Matt, Engineer
Category: BMW
Satisfied Customers: 20604
Experience:  Mechanical Engineer with 20 years experience in the auto industry, 8 yrs in formula 1 engine testing
12772297
Type Your BMW Question Here...
Matt is online now
A new question is answered every 9 seconds

RESET THE BRAKE WARNING LIGHT ON X6 AFTER REPLACING PADS AND SENSORS

Resolved Question:

HOW DO I RESET THE BRAKE WARNING LIGHT ON X6 AFTER REPLACING PADS AND SENSORS
Submitted: 5 years ago.
Category: BMW
Expert:  Matt replied 5 years ago.


Hello

try the following:

Push start button twice with the foot off the brake and clutch.
If no start button then just insert key to turn on the ignition but don't start engine

check control image should disappear and all that is left is current time on the LCD panel of the instrument cluster, press and hold the odometer reset button.

After a few seconds, a yellow icon will show up showing that you have service indicator light on. Don't let go of the odo button

Push and hold the "BC" button whilst still holding down the odo button of the turn signal stalk until it states "Reset?"

then let go of the odo button and push the BC button back in and hold, a little clock will come up, once the clock graphic appears the reset goes away
Release the BC button
. Turn the car off and restart as normal.
The brake light service indicator should now be off
Matt and 2 other BMW Specialists are ready to help you

Related BMW Questions