How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony Your Own Question
Anthony
Anthony, BMW Technician
Category: BMW
Satisfied Customers: 11750
Experience:  ASE Master Automobile Technician with over 20 years exp. in this field.
15218643
Type Your BMW Question Here...
Anthony is online now
A new question is answered every 9 seconds

1999 bmw 740i: p0011..vanos solenoid and cam sensor..comes back

This answer was rated:

1999 bmw 740i has code p0011 replace vanos solenoid and cam sensor no change code still comes back any suggestions

Hello! Welcome to justanswer!

 

What code are you receiving exactly?

Customer: replied 7 years ago.
p0011 cam timing over advanced bank 1
Ok, the bank 1 VANOS unit on the camshaft is bad or stuck. You may need to replace it to get rid of the code. Do you need the procedures to replace it?
Customer: replied 7 years ago.

I already replaced the vanos solenoid and both cam sensors and still get code

Right, the sensors and solenoid were always ok. The adjuster on the end of the cam is bad.

Anthony and 6 other BMW Specialists are ready to help you
Customer: replied 7 years ago.
Ok sorry yes can you send the procedures
Customer: replied 7 years ago.
can i get the prcedures on this fix

Yes, preparing them now.

Customer: replied 7 years ago.
thank you

You bet! Thank you also. See the link below for the correct procedures.

 

CLICK HERE FOR PROCEDURES

Related BMW Questions