How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Australia Whitegoods
Satisfied Customers: 14410
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
21107370
Type Your Australia Whitegoods Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

I have have a fisher&paykelNautilus dishwasher which is

Customer Question

I have have a fisher&paykelNautilus dishwasher which is stuck on S1 and keeps beeping what is wrong with it
JA: Just to clarify, what's the make and model of your dishwasher? And have you run a diagnostic test cycle?
Customer: Fisher& Paykel Nautilus no I haven't
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: No
Submitted: 6 months ago.
Category: Australia Whitegoods
Customer: replied 6 months ago.
I sent a message yesterday and Iam still waiting for the answer
Expert:  Appliance Guru replied 6 months ago.

One moment while I get some information for you!

Expert:  Appliance Guru replied 6 months ago.

Is the code S1 or F1?

Customer: replied 6 months ago.
S1
Expert:  Appliance Guru replied 6 months ago.

That is a main control failure on the unit you will need to replace the main control.

All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am credited through the site, tips are appreciated.

Customer: replied 6 months ago.
How much will it cost to replace and will we need someone to do it
Expert:  Appliance Guru replied 6 months ago.

Yes I would call a tech about 200 dollars total.

All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am credited through the site, tips are appreciated.

Customer: replied 6 months ago.
It is not S 1 it is fi
Expert:  Appliance Guru replied 6 months ago.

The F1 is a flood code meaning water is under the unit in the flood basin. You have a leak and would need to pull the unit out and dry out the flood basin and source the leak.

Related Australia Whitegoods Questions