How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 20385
Experience:  Highly accurate diagnostician with over 30 years of experience.
11418111
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

We have a BOSCH FRONT LOADER WASHING MACHINE.THE DOOR OPENER

Customer Question

We have a BOSCH FRONT LOADER WASHING MACHINE.THE DOOR OPENER BROKE.WE HAVE A REPLACEMENT PART.IS THERE A TRICK TO REPLACING THE PART.CAN NOT GET THE PARTS BACK TOGEATHER.
Submitted: 6 months ago.
Category: Australia Whitegoods
Expert:  Kelly replied 6 months ago.

Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you!

Expert:  Kelly replied 6 months ago.

May I please have your model number so I am able to provide you with accurate, model specific information?

Customer: replied 6 months ago.
WAS28440 AU/14FD8806200027
Expert:  Kelly replied 6 months ago.

Please allow me just a few minutes to prepare some information for you, thank you!

Expert:  Kelly replied 6 months ago.

See the attached page. What number are you having trouble fitting?

Customer: replied 6 months ago.
PART NUMBER 0220
Expert:  Kelly replied 6 months ago.

There are grooves the ends fit into around the door shell. Is it just not allowing the door to be put back together or what exactly is happening with it? Can you post a picture?

Customer: replied 6 months ago.
I HAVE IT IN THE GROOVES BUT THE PROCESS OF PUTTING IT ALL TOGETHER IS PROVING DIFFICULT.IS THERE A SYSTEM.THE HANDLE IS MOVING OUT OF THE GROOVES AS IT IS SKREWED TOGETHER.
Expert:  Kelly replied 6 months ago.

There is not really a system. When I run into one of those, I use a small drop of adhesive to hold the handle in place. I use only a drop to keep it, not looking to secure it. If you use a small drop of hot glue, it sets very fast and is not difficult to remove if you have to replace it again. Have you tried that?

Customer: replied 6 months ago.
NO I WILL TRY THAT.MAY HAVE TO DO IT AFTER WORK.CAN ICONTACT YOU BACK.THANKS
Expert:  Kelly replied 6 months ago.

Certainly, that should work well for you!

Customer: replied 6 months ago.
Hi Kelly got it thanks
Expert:  Kelly replied 6 months ago.

Awesome, nice work!

I hope I have earned your 5 star rating using the stars at the top of the page! Please let me know if you have additional questions, I am here to help! Thank you so much!