How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ezekiel Your Own Question
Ezekiel
Ezekiel, Home Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 261
Experience:  Appliance Repair Expert
91962359
Type Your Australia Whitegoods Question Here...
Ezekiel is online now
A new question is answered every 9 seconds

I have the same problem with miele dishwasher. Shows F11

Customer Question

I have the same problem with miele dishwasher. Shows F11 inlet/dreain error atm. It happens soon after starting it...can I drain or clean myself?
JA: Can you guesstimate how old your Miele is? And just to clarify, what's the exact model?
Customer: would be 6 yrs old plus
JA: Do you plan on doing the work yourself?
Customer: yes because I'm house sitting
JA: Anything else we should know to help you best?
Customer: not really except it just happened halfway through a cycle and I haven't been able to make it work since
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Appliance Technician about your situation and then connect you two.
Submitted: 8 months ago.
Category: Australia Whitegoods
Expert:  Ezekiel replied 8 months ago.

hi are you available

Expert:  Ezekiel replied 8 months ago.

After each drain pump step, the circulation pump operates for 2 seconds and heater pressure switch B1/13 checks the water level. If it is too high (large quantity of residual water remaining in the cabinet), the drainage time is extended. If, after a further check, the water level is still too high, then the program is interrupted, the fault code is saved and the drain pump is activated. Fault code F11

Expert:  Ezekiel replied 8 months ago.

1. Clean the on-site drain.
2. Check the sump drain.
3. Check the filters.
4. Check the heater pressure switch and replace it if necessary.

Cause:
Ball in non-return valve in sump has not opened (e.g., jammed).

Remedy:
Clean the non-return valve in the sump or replace it if necessary. Cause: Foreign objects in the drain pump.

Remedy:
Clean the drain pump and its impeller.

Cause:
Drain pump defective.

Remedy:

1. Check the voltage supply to the drain pump.
2. If correct voltage is present, check the drain pump motor winding.
3. Replace the drain pump, if necessary.

Expert:  Ezekiel replied 8 months ago.

please rate me high as that is how I get paid from the site thanks should you need further assistance please send me a reply ill be glad to help you.