How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AUSSIE- Repair Tech. Your Own Question
AUSSIE- Repair Tech.
AUSSIE- Repair Tech., Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 3620
Experience:  Appliance Tech with 12 years experience in the Industry.
55003593
Type Your Australia Whitegoods Question Here...
AUSSIE- Repair Tech. is online now
A new question is answered every 9 seconds

JA: . How can we help? Customer: do you know what the

Customer Question

hi
JA: Hi. How can we help?
Customer: do you know what the rror codes are on an electrolux ewf1083 washinf machine
JA: I'll do all I can to help. Tell me a bit more about what's going on so we can help you best.
Customer: washing machine error codes
JA: Is there anything else the Whitegoods Technician should be aware of?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Whitegoods Technician about your situation and then connect you two.
Submitted: 7 months ago.
Category: Australia Whitegoods
Expert:  bonzaco replied 7 months ago.
Can you give me the error code and I will look it up for you.
Customer: replied 7 months ago.
washing machine error codes
electrolux EWF1083 error codes 42 & 69
Customer: replied 7 months ago.
any luck ?
Customer: replied 7 months ago.
did you find out ?
Customer: replied 7 months ago.
hello?
Customer: replied 7 months ago.
can you help or not ?
Expert:  bonzaco replied 7 months ago.
Can you give me the pnc which is one the rating label. - E69 is a heating problem but I need the pnc to check out E42.
Customer: replied 7 months ago.
What is the pnc
Expert:  bonzaco replied 7 months ago.
Its the manufacturers product code for your specific version of that model - in your case there are ten different versions of that appliance. However the most common on most of them for E42 is a faulty door lock but quite often this turns out not to be the door lock but the actual control module - when you start the appliance do you hear the door lock click on start up?

Related Australia Whitegoods Questions