How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AUSSIE- Repair Tech. Your Own Question
AUSSIE- Repair Tech.
AUSSIE- Repair Tech., Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 3620
Experience:  Appliance Tech with 12 years experience in the Industry.
55003593
Type Your Australia Whitegoods Question Here...
AUSSIE- Repair Tech. is online now
A new question is answered every 9 seconds

I to have a hotpoint ultima WMD960. Originally it stopped

Customer Question

Hi Daniel. I to have a hotpoint ultima WMD960. Originally it stopped half way through its cycle and said " No water supply" I turned it off and waited a bit. Now it does nothing. If I select a mode, the door locks, but it doesn't start. I've even tried a spin cycle. Any ideas?
Submitted: 9 months ago.
Category: Australia Whitegoods
Expert:  bonzaco replied 9 months ago.

Power off and pop around the back, take off the rear cover on the left hand side near the base you will see a circuit board, check and see if you can see any damage to it ie burn wires, tracks on the board etc. ~ Ian

Related Australia Whitegoods Questions