How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 19094
Experience:  Highly accurate diagnostician with over 30 years of experience.
11418111
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

We have trouble lighting the large burner, it lights

Customer Question

We have trouble lighting the large burner, it lights immediately and we know to keep holding down for some clicks, as with the other burners, but with the large one, hold down for 10 clicks lift of, flame goes out, do it again for about 10 more, same thing. I would say hold for about 30, you will get there, most annoying . Any clues
Thanks. Jill
Submitted: 11 months ago.
Category: Australia Whitegoods
Expert:  Kelly replied 11 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! I suspect you have an issue with a spark path to ground or a thermocouple is failing. Use sand paper to clean the electrode or the thermocouple. Any change after cleaning?

Related Australia Whitegoods Questions