How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 21131
Experience:  Highly accurate diagnostician with over 30 years of experience.
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

G641 Plus: I've checked intake and outlet restrictions and

Customer Question

G641 Plus: I've checked for water intake and outlet restrictions and found nothing which would cause blockage. The "Inlet/Outlet" light continues to flash.
What can I check next?
Submitted: 1 year ago.
Category: Australia Whitegoods
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! If it fills and drains as it should, the issue is with the heater pressure switch. The switch may be faulty or the wash recirculation pressure is low due to a plugged filter or wash path or the wash motor may be faulty. Is the filter clean? Will the machine start but then stop after the motor begins to run?

Related Australia Whitegoods Questions