How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AUSSIE- Repair Tech. Your Own Question
AUSSIE- Repair Tech.
AUSSIE- Repair Tech., Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 3620
Experience:  Appliance Tech with 12 years experience in the Industry.
55003593
Type Your Australia Whitegoods Question Here...
AUSSIE- Repair Tech. is online now
A new question is answered every 9 seconds

I have a Westinghouse kitchen stove. A front element wsa

Customer Question

i have a Westinghouse kitchen stove.
A front element wsa taken out for cleaning. now the ceramic connector block that the bayonet end of the element is supposed to fit in has become detached from a holder under the rangetop.
How can i lift the top to refit said ceramic block into place
Tom
Submitted: 1 year ago.
Category: Australia Whitegoods
Expert:  Kelly replied 1 year ago.
Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! There are likely two release clips under the front edge of the top, between the front and the top assemblies. A thin putty knife will work well to release them. May I please have your model number so I am able to provide you with accurate, model specific information?