How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 19129
Experience:  Highly accurate diagnostician with over 30 years of experience.
11418111
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

FP GW708U Top loader built July 1997. Hot water very slow

Customer Question

FP GW708U Top loader built July 1997. Hot water very slow filling gauze filter at wall tap is clean. When filling on warm or hot setting eventually starts beeping and stops filling. Hot water valve lets water into machine when temp set on hot but much slower flow rate compared with cold water when temp set to cold. Is hot water valve starting to fail?
Submitted: 1 year ago.
Category: Australia Whitegoods
Expert:  Kelly replied 1 year ago.
Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! If the screen in the valve is clear as well as the one at the tap, then the valve is likely starting to fail and will need to be replaced.

Related Australia Whitegoods Questions