Australian Whitegoods Questions? Ask a Technician for Answers ASAP
Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! That error means that thecold fill valve has issues. Check all connections and water supply to the valve. If found to be good, replace the cold valve.
Inlet Valve (Cold) <----- CLICK HERE FOR THE CORRECT PART FOR YOUR MODEL(00110001) Phase 2 to 6 - Cold Valve FaultyThe Motor Control Module has measured a voltage from the valvediagnostic circuit that indicates the cold valve is faulty. The most likelycause is that the valve harness has not been connected correctly orthe valve is open circuit.