How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 19735
Experience:  Highly accurate diagnostician with over 30 years of experience.
11418111
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

Guys I am a service tech working on one S24awn-u56, the

Customer Question

Hi guys
I am a service tech working on one S24awn-u56, the system has tripped the breaker and is not working
their is no communication between the indoor and outdoor.
Their is continuity in the cables
terminal three when disconnected has nothing on either pcb when it should be a fluctuating voltage ?
Please help
Regards Terry
Submitted: 1 year ago.
Category: Australia Whitegoods
Expert:  Kelly replied 1 year ago.
Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! You must measure the voltage with the cables hooked up. If still no voltage at all, there is a failure with one of the control boards. Do either board appear to have any damage to them on the solder side of the board?