How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 18578
Experience:  Highly accurate diagnostician with over 30 years of experience.
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

Westinghouse sensor s8925. error 10 flashing with 1 long beep

This answer was rated:

Westinghouse sensor s8925. error 10 flashing with 1 long beep repeated. happened at the 55 minute rinse mark

Hi, welcome to Just Answer. My name is XXXXX XXXXX I look forward to helping you! That error code indicates an issue with the water supply. If the water pressure to the inlet valve from your home's plumbing is good, the water inlet valve will likely need to be replaced.

Kelly and other Australia Whitegoods Specialists are ready to help you

Related Australia Whitegoods Questions