How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly, Appliance Technician
Category: Australia Whitegoods
Satisfied Customers: 18663
Experience:  Highly accurate diagnostician with over 30 years of experience.
Type Your Australia Whitegoods Question Here...
Kelly is online now
A new question is answered every 9 seconds

Have a 6100 Series Commercial Grade 7 cycle machine. Model

This answer was rated:

Have a 6100 Series Commercial Grade 7 cycle machine. Model #6LBR6233BQ0.
Have dismantled machine: Agitator from Basket & Tub. I have replaced coupling between Motor & Gearbox and re assembled.
Have withdrawn gearbox shaft from Tub.
Have new Clutch Band and Lining & new Brake Cam Driver.
Question: Where do I align the new Clutch Band and Brake Cam Driver when I install them?

Hi, welcome to Just Answer. My name is XXXXX XXXXX I look forward to helping you! There really is no specific alignment, only so that the driver cam is not positioned so it hits the spring in the clutch band when the gearcase is repositioned in place.

Kelly and other Australia Whitegoods Specialists are ready to help you

Related Australia Whitegoods Questions