Recent Feedback
From yesterday, each time I try to start my LG ld-14aw2 dishwasher I've got an e1 error code flashing
Already Tried: I took off the right side cover to check if any water leakage but nothing I can see so far
Hi there and welcome to our website,The E1 refers to a leak in the inlet hose.The machine may have partially filled in the base, enough to trigger this fault code. Is there any water inside the wash compartment?You may have to pull the dishwasher right out and inspect the connection at the base of the machine etc, and also tip the dishwasher back to about 45-60 degrees and see if any water comes out from the overflow pan underneath okay,keep me posted*
I took off the right and left side of the dishwasher no water at all even if I tip it back at 45 degrees. When I start it I can see some water pumped into a plastic reservoir on the left side of the dishwasher and after a minute I've got that alarm again
Im away for the next few days, so I will opt out and leave this for other experts to finalise with you ok,Good luck,
Relist: Inaccurate answer. I received a basic answer and I still don't know what's faulty. Do I have to change some parts (pump?)because on the base of the dishwasher I didn't notice any water and after I opened both sides I can't see any leak. So what can I do now my "expert" is away for a couple of days. My dishwasher is a LG LD-14AW2and each time I turn it on I get an error code: E1. On the manual, they are talking about leakage but as I said above, I don't have any water on the base. Thank you for your help